A cikk tartalma
Why Does It Matter Which Scanner We Use?
Today, “laser scanning” can refer to anything from a smartphone application to a professional instrument costing tens of millions of forints. The key difference is not the price of the device, but what can reliably be built on the resulting data: a virtual walkthrough may be sufficient for a tenant, but it is not enough as a basis for designing a mechanical retrofit.
Choosing the wrong level can be expensive in two ways. If the selected level is too low, the survey may need to be repeated, or the design may be based on inaccurate dimensions. If it is unnecessarily high, the project pays for a level of accuracy it does not actually need.
This is particularly important when the survey data will later be used to create a BIM model or a BIM-based facility management dataset. A model cannot be more accurate than the point cloud it is based on. If the scanner is inaccurate, or important details cannot be distinguished in the captured data, those errors will be transferred into the model and then into the operational data as well. This is why not every scanner is suitable for BIM-based surveying. A reliable BIM model generally cannot be created from a virtual walkthrough or a smartphone LiDAR survey, while static scanners are widely used in most Scan to BIM projects.
A laser scanner comparison is therefore more than simply comparing technical specifications. As an investor, designer or facility operator, the key question is what decisions you want to make based on the survey. Different data is required for presenting a property, preparing a refurbishment, or redesigning an existing pipe network.
In this article, we divide the available solutions into six levels and explain what each level is suitable for.
The Six Levels at a Glance
As we move up the levels, surveys generally become more accurate and detailed, while also requiring more time and expertise.
This is a practical guide rather than a standardised classification. Categories may overlap, and a higher level does not necessarily mean a slower instrument. The “Not sufficient for” column highlights typical limitations rather than uses that are impossible under all circumstances.
| Level | Device type (example) | Typical accuracy | Suitable for | Not sufficient for |
|---|---|---|---|---|
| 1. Entry-level virtual scanner | Matterport Pro2 | ±44–58 mm at 4.5 m¹ | Virtual walkthroughs, condition documentation, property presentation | Dimensionally accurate design |
| 2. Photo-based virtual scanner + new, low-resolution LiDAR | Matterport Pro3, smartphone / tablet LiDAR | Pro3: ±20 mm at 10 m; smartphone: 1–10 cm | Rapid condition capture, approximate dimensions, preliminary surveys | Detailed design basis |
| 3. Entry-level mobile scanner | Entry-level SLAM-based mobile scanners | 2–10 cm² | Rapid surveying of large areas and volumes | Detailed architectural and MEP design |
| 4. Handheld scanner | Leica BLK2GO | ±2 cm (indoors) | Walkthrough surveys, interiors, medium-detail documentation | Highly detailed MEP analysis |
| 5. Static scanner for architectural surveying | Leica BLK360 G2 | 4 mm at 10 m | Doors, windows, walls, floor plans; architectural Scan to BIM models | Dense MEP systems |
| 6. Professional static scanner | Leica RTC360 + P50 | 1.9 mm at 10 m | Highly detailed analysis, MEP and industrial surveys | Fast, simple condition capture (over-specified) |
The accuracy values above are based on manufacturer specifications or published research. Actual results also depend on site conditions and data processing.
An important distinction is that technical data sheets may refer to depth accuracy, 3D point accuracy or system accuracy. These figures do not automatically represent a guaranteed tolerance for the delivered point cloud or BIM model. The registration of individual scan positions and the quality of data processing also play an important role.
A dense point cloud is not necessarily an accurate point cloud. Measurement accuracy and the ability to identify the smallest relevant element in the dataset must be assessed separately. For this reason, manufacturers usually specify resolution and accuracy as separate characteristics.
The Levels in Detail
1. Entry-Level Virtual Scanner
Matterport Pro-type devices are primarily designed to create virtual walkthroughs. They reconstruct a space from 360° imagery and depth data. The result is visually impressive and quick to produce, but dimensional accuracy may vary by several centimetres. These solutions are well suited to property presentations, condition documentation or providing tenants with a visual overview of a space.
Within this category, we primarily refer to the Pro2, which uses structured light rather than LiDAR. For a vacant office being marketed to prospective tenants, the relationship between rooms and the overall appearance of the space may be the most important factors. However, a visually convincing digital representation is not sufficient when exact dimensions are needed for a component that will later be installed.
The key point is that a 3D building survey suitable for presentation purposes is not the same service as a survey suitable for detailed technical design.
2. Photo-Based Virtual Scanner with New, Low-Resolution LiDAR
Newer-generation devices such as the Matterport Pro3 supplement photography with LiDAR measurements. According to the manufacturer, the Pro3 has an accuracy of ±20 mm at 10 metres. Smartphone and tablet LiDAR applications also fall into this broader category. One study found errors of around 1 centimetre in some situations and approximately 10 centimetres in others. These tools are sufficient for rapid preliminary surveys, but not as a general basis for detailed design.
However, the Pro3 and smartphone applications do not offer equivalent capabilities. Smartphone results depend on the application, the route taken during the survey and the processing workflow. The 1–10 cm range observed in research should not be interpreted as a guaranteed tolerance applicable to every device.
The limitation in this category primarily applies to detailed work with tight tolerances. Preliminary space planning may have very different requirements from the design of an MEP connection. You should therefore assess the actual usability of the data rather than relying solely on the fact that a device is described as “LiDAR”.
3. Entry-Level Mobile Scanners
Mobile scanners that measure while the operator walks through a space typically use SLAM technology and may achieve accuracy in the range of 2–10 cm. They allow large areas, multiple floors or large volumes to be captured quickly. They can support concept design and preliminary quantity estimation, but they are generally insufficient when the exact position of a door opening or MEP connection is required. This description applies to the entry-level category defined here and should not be interpreted as a statement about all mobile scanners.
SLAM works by allowing the system to map its environment while simultaneously determining its own position. Tracking movement is therefore an essential part of the surveying process.
For example, speed may be the main priority when carrying out an overview survey of a warehouse. However, critical connection points that will later be modified should be treated separately: rapid capture of a large area does not replace the need for detailed measurement where precision is required.
4. Handheld Scanners
Professional handheld scanners, such as the Leica BLK2GO family, continuously capture the environment while the operator moves through the space. The manufacturer specifies an indoor accuracy of ±2 cm for the BLK2GO PULSE. Their main advantage is speed: an entire office floor can be surveyed quickly without repeatedly setting up a tripod. They are well suited to medium-detail surveys and interior spaces.
The ±2 cm value applies to a controlled environment and a three-minute scan. It should not be interpreted as meaning that every long or complex walkthrough will automatically achieve the same result.
For facility management overviews or the documentation of interior spaces, this can provide an effective compromise. In densely serviced areas, however, it is also necessary to assess whether small but important elements can be clearly distinguished in the point cloud. Fast data capture and detailed modelability are separate requirements.
5. Static Scanner for Architectural Surveying
A static scanner measures from a tripod at multiple scan positions, which allows significantly greater accuracy. The Leica BLK360 G2 has a manufacturer-specified accuracy of 4 mm at 10 metres. This makes it possible to survey doors, windows, walls and openings reliably, and the resulting point cloud can be used to create an architectural BIM model through a Scan to BIM workflow.
The 4 mm value refers to the 3D accuracy of an individual measured point. It is not a guaranteed maximum deviation for the complete building model. During a laser scanning survey, data from multiple scan positions must be registered into a common coordinate system and then checked.
A point cloud is a collection of measured 3D points, not a completed intelligent building model. In a Scan to BIM workflow, walls, slabs, doors, windows and other required elements are modelled from this point cloud. It is therefore worth specifying at the procurement stage whether you want to receive a point cloud, floor plans, sections or a BIM model.
6. Professional High-Performance Static Scanner
High-end static scanners such as the Leica RTC360 can measure with an accuracy of 1.9 mm at 10 metres while maintaining a high capture speed. This level is required for highly detailed analysis, including MEP systems, pipe networks and industrial facilities where an error of one or two centimetres may already cause clashes during design.
The 1.9 mm figure also refers to 3D point accuracy. The manufacturer specifies 2.9 mm at 20 metres and 5.3 mm at 40 metres, which means that measuring distance also matters. These are statistical accuracy values rather than a guaranteed maximum error for every measured point.
In a plant room retrofit, for example, both the clearance between pipes and the position of connection points may be critical. In addition to choosing the right instrument, scan positions must also be carefully planned: even the best scanner cannot capture hidden geometry from a single position.
How Should You Choose? Four Questions for Investors
The appropriate level is determined by the intended use, not by the device itself. These four questions are worth asking before commissioning a survey.
The following rules of thumb apply to the device examples presented above and to detailed design tasks:
- What will the data be used for? Levels 1–2 may be sufficient for presentation and documentation. Detailed design generally requires at least Level 5. In your request for quotation, specify the actual purpose, such as leasing, refurbishment or an MEP retrofit.
- How much deviation can the project tolerate? If a few centimetres do not matter, Levels 3–4 may offer a faster and more cost-effective solution. If millimetres matter, static scanners are generally required. Identify which dimensions are critical and what type of verification you expect for the delivered data.
- Is there dense MEP infrastructure? Level 6 may be justified in plant rooms, technological spaces and industrial facilities. Indicate any access restrictions and particularly important connection points in advance.
- Will a BIM model be created from the survey? If the survey will be used to create a BIM model and later a facility management database, it is worth choosing a survey level that can reliably support that model. In addition to geometric detail, the required information content should also be defined.
It is important to note that millimetre-scale local accuracy is not exclusively achievable with static scanners across the entire market. Some advanced mobile systems also specify this level of local accuracy. The specific device and measurement procedure should always be evaluated rather than relying solely on the category name.
In many cases, the best solution is to combine different levels. Large, simple spaces can be captured quickly with a mobile scanner, while critical rooms can be surveyed using a static scanner.
When commissioning a 3D building survey, do not ask only for a general statement about accuracy. Clarify what type of dataset will be delivered, what it can be used for and how its quality will be verified.
How Does AFMTEC Work?
AFMTEC carries out building surveys using a high-end professional static laser scanner that falls within Level 6 of the classification above. The tripod-mounted instrument measures from multiple scan positions and can reliably capture not only walls, openings, doors and windows, but also dense MEP systems, pipe networks and industrial spaces.
The scans are registered and checked on site, and the resulting point cloud can be used to create floor plans, sections and BIM models through a Scan to BIM workflow. This is important because a BIM model and the facility management dataset built on top of it can only be reliable if the underlying point cloud is also reliable.
The client receives more than a point cloud. Depending on the project requirements, the survey can be used to produce 2D drawings, a BIM model and a dataset prepared for facility management, allowing the same survey to support the project from design through to operations. We explain the surveying workflow, available deliverables and key cost factors on our laser scanning survey service page.
If you are unsure what type of survey your project requires, please contact us. We will explain the available laser scanning options in detail and help determine what data, level of detail and output format are appropriate for your project.
When requesting a quotation, it is useful to provide the building type, approximate floor area, number of floors, the purpose of the survey and the required deadline. Please also indicate whether previous drawings are available and whether you require a point cloud, drawing documentation or a Scan to BIM service.
Do you have questions about laser scanners or surveying? Contact us and we will help determine what your project requires.
Request information or a quotation for a laser scanning building survey via the AFMTEC form.
Frequently Asked Questions
Is a Smartphone LiDAR Survey Sufficient for Design?
Generally, no. Errors in smartphone applications can reach up to 10 centimetres in some situations, which makes them useful for rapid preliminary surveys but unsuitable as a general basis for detailed design. Before detailed technical design begins, the suitability of the data should be verified. A visually convincing spatial model does not in itself demonstrate dimensional accuracy.
What Is the Difference Between a Mobile and a Static Scanner?
A mobile scanner measures while moving, making it fast but generally less accurate. A static scanner measures from multiple fixed positions on a tripod, making the process slower but capable of millimetre-level accuracy. This is a general comparison of the categories presented above; actual performance depends on the specific device and task.
What Is Scan to BIM?
Scan to BIM is the process of creating a BIM model from a laser-scanned point cloud. For the refurbishment and operation of existing buildings, it provides an accurate representation of the existing condition. More precisely, the term refers to the complete workflow from surveying through to model creation. Equipment data and documentation required for facility management must also be assigned separately.
How Long Does a Laser Scanning Survey Take?
On-site data capture and data processing should be scheduled separately. The required time depends on the size, complexity and accessibility of the building, as well as the requested level of detail. Once the point cloud has been assembled, producing drawings or a BIM model requires additional work. A specific project schedule can therefore only be determined based on the project parameters.
How Much Does a Laser Scanning Survey Cost?
The main factors to clarify when requesting a quotation are the floor area, survey level, required detail and requested deliverables. Do not compare only the cost of the on-site measurement. Ask what is included in data processing, quality control and documentation as well. This allows you to compare genuinely equivalent services.
